Use And Maintenance; Touch Control User Instructions; (Model Vt Tc 2P.1-Tr3220) - Teka VT TC 2P.1 Instrucciones Para La Instalación

Use and Maintenance

GB
Touch control user instruc-tions
(model VT TC 2P.1-TR 3220)
CONTROL PANEL ELEMENTS (see fig.
4)
1
On/off sensor button.
2 Indicators of the heating element.
Power and/or residual heat indicators.
3
Power reduction sensor button (less).
4
Power increase sensor button (more).
5
Outer ring selection sensor button (dou-
6
ble circuit heating element).
Timer / clock indicator.
7
Chosen time indicator (clock).
8
Locking sensor button (locks the rest of
9
the sensors, except on / off sensor).
Indicator light of the timed heating ele-
1 1
ment.
Indicator light of the activated locking
12
option.
13 Indicator light showing double circuit of
the heating element is on.
Sensor button to reduce the time on the
14
clock (less).
Sensor button to increase the time on the
15
clock (more).
Decimal point.
16
NOTE: * Only visible when device is in ope-
ration.
Actions are carried out using the sensors
marked on the control panel. It is not neces-
64
sary put pressure on the glass; by simply
touching the sensor with your finger you will
activate the desired function.
Each action is confirmed with a beep.
The first time you connect the hob to the
electricity or if a power outage occurs, the
device will carry out a self-check and will
remain with the "lock activated" (indicator
light 12 on).
Press the locking sensor
indicator light turns off. The hob will beco-
me unlocked.
TURNING ON THE APPLIANCE
1 Touch the on sensor
one second.
The touch control panel will become acti-
vated and you will hear a beep. If a coo-
king zone is hot, the corresponding indica-
H
tor will show an and a
The next action must be taken within 10
seconds; otherwise, the touch control
panel will turn off automatically.
When the touch control panel is activated,
it can be disconnected at any time by tou-
fig. 4
(9) until the
(1) for at least
0
alternately.