Locking The Hob's Sensors - Teka VT TC 2P.1 Instrucciones Para La Instalación

ACTIVATING THE HEATING ELEMENTS
Once the touch control panel has been
activated by using sensor button
you can turn on the chosen heating ele-
ments.
1 With the sensor button
GB
choose the desired power level (from 1
to 12).
1 With the sensor button
choose the desired power level (from 1
to 12).
2 Place cookware over the cookware
zone. The cookware recognition func-
tion will activate the induction coil.
The sensor buttons
ve, so if you keep your finger pressed on
the sensor buttons they will increase or
decrease in a continuous manner.
The appliance will disconnect if no cook-
ware has been placed on the cooking zone
after 10 minutes have passed since the
cooker has been turned on.
To rapidly turn the heating element on
to the maximum power: choose the hea-
ting element and touch sensor button
(4). The heating element will activate at its
maximum power level (level 12).
TURNING OFF THE HEATING ELEMENT
1 Use sensor button
power level to level 0. The heating ele-
ment will turn off automatically.
To rapidly turn the induction element
off: regardless of the power level, if you
simultaneously touch sensor buttons
and (5/4), the heating element will
turn off immediately.
When a heating element is turned off, an
will appear in the corresponding power
70
indicator if the glass surface is hot in the
corresponding cooking zone, which means
that there is a risk of burns. When the tem-
(1), perature has decreased, the indicator will
turn off (if the hob is disconnected) or, if
the hob is connected, the indicator will
have a
or (5/4),
TURNING OFF THE APPLIANCE
or (5/4) The device may be turned off at any time
by touching the general on/ off sensor but-
ton
appear in the zones that are hot. The indi-
cators of the rest of the heating elements
will not light up.
and are repetiti-
using the control; do not rely on the
cookware detector.
The safety function can be activated after
connecting the hob. To do so, touch sen-
sor button
trol. Immediately touch sensor buttons
(7) and
indicator light of the "Stop" function (8) will
turn on, which indicates that the control
panel is locked, except for sensor button
The electronic control will remain locked,
even after disconnecting the control using
(4) to lower the sensor button
Unlocking to cook
If you want to unlock the control and cook,
touch sensor button
touch control. Immediately afterward touch
sensor buttons
cator light of the "Stop" function (6) will turn
off, which indicates that the control panel
H
is unlocked.
0
.
(1). In stand-by mode, an
After use, disconnect the device

Locking the hob's sensors

(1) to activate the touch con-
(4) at the same time. The
(1).
(1) until the user unlocks it.
(1) to activate the
(7) and
H
will
(4). The indi-