Product Overview; Applications; Principle Of Operation - DST CS-5 Manual Del Usuario

EN
3 PRODUCT DESCRIPTION

3.1 PRODUCT OVERVIEW

1. Process air in
2.
3. Control panel
4. Process fan
5. Rotor
6. Rotor motor
7. Dry air out
8. Regeneration heater
9. Wet air out

3.2 APPLICATIONS

industries, or where a dry environment is required for storing and handling of moisture sensitive products and raw materials.

3.3 PRINCIPLE OF OPERATION

moisture which is removed from the process air, is transferred over to the other sector as the rotor turns slowly.
1. Wet air outlet
2. Regeneration sector
3. Regeneration heater
4. Regeneration air
5. Dry air outlet
6. Rotor motor
7. Process sector
8. Process air fan
9. Process air inlet
10. Rotor
CONSORB
Seibu Giken DST
6
7
regeneration air, is used to heat the rotor material to evaporate the adsorbed moisture vapour from the desiccant. The
2
1
10
9
8
5 4
9
8
4
3
6
7
10
2
1
3
process air, is dried as it
Warm air with Hot air with low
high humidty relative humidity
5
Water molecules
Humid air Dry air
Silica gel micropores
adsorbs the water molecules
CS-5, 5L EN.03