Type Plate Overview; Serial Number Structure - DST CS-5 Manual Del Usuario

2 INTRODUCTION

2.1 TYPE PLATE OVERVIEW

1. Model designation
2. Serial number
3. Electrical supply information
4. Regeneration heater power

2.2 SERIAL NUMBER STRUCTURE

structure which does not match the current structure.
Nr DR-50bb.000cddd
1. Model designation
2. Regeneration heater (a) - the type of heater the unit is equipped with.
R = Resistive (electric)
G = Gas
S = Steam
3. Special unit ( ) - Code to indicate a special manufactured unit.
SP = Special
The absent of "SP" will indicate it is a standard manufactured unit, e.g. DR-50RSP is a special manufactured unit. DR-50R is a standard manufactured unit.
4. Serial number (c) - To indicate if the unit belong to a special or standard manufactured serie.
0 = Standard manufactured serie
7 = Special manufactured serie
5. Serial number (ddd) - Serial number for the manufactured unit (ddd).
001, 002, 003, 004...n
CS-5, 5L EN.03
HW = Hot water
WW = Warm water
D = Diesel
O = Oil
RECUSORB DR-50R
Nr DR-50R.0000XXX
3 x 400V ~ 50Hz
P motors 0.23kW
P tot
I tot
Electric heater P nom 4 kW
Seibu Giken DST AB
Avestagatan 33
16353 SPÅNGA, Sweden
Nr DR-50abb.000cddd
9
4.3 kW
10 A
Seibu Giken DST
EN