File Data Modification Window; File Data Input Window - SICE A 926 Manual De Instrucciones

The modification screens refer to:
- Vehicle makes in databank (makes entered by the operator)
- Vehicle models in databank (models entered by the operator)
- Customers on file
- Vehicles on file
- Operators on file
To make a modification, proceed as follows:
- select the field to be modified using the "Tab" or "Shift" + "Tab" keys (if the window contains
more than one field)
- enter a new character/value over the letters or numbers of the selected item
- re-enter the correct value.
To confirm the changes made and exit this window, proceed as follows:
- press the F3 key; you will be prompted to confirm saving of the modified data.
- press F3 to confirm.
If you do not wish to confirm saving, press F2.
The data input windows refer to:
- Marks of vehicle in databank;
- Models of vehicle in databank;
- Customers on file;
- Vehicles on file;
- Operators on file.
To enter the data, proceed as follows:
- select the field to be entered using the "Tab" or "Shift" + "Tab" keys (if the window contains
more than one field)
- type a character/value
To confirm the data entered and exit this window, proceed as follows:
- press the F3 key; you will be prompted to confirm saving of the data.
- press F3 to confirm,
If you do not wish to confirm saving, press F2.
When entering a new item, the system prompts the user with data for a similar vehicle to
simplify the entry of the tolerance data.
Notes
The data for a new customer and/or a new vehicle can also be entered at the end of the
measurement and adjustment procedure of a model chosen from the vehicle databank.
In the printing window, a message prompting the input of data will appear when saving of data
on request or in automatic mode has been set in the setup.
In the printing window, the data input window is accessed by pressing the F9 key.

FILE DATA MODIFICATION WINDOW

FILE DATA INPUT WINDOW

29