Control Functions; Basic Operation; Turning On; Turning Off - OHAUS FD Serie Manual De Instrucciones

FD Series Scales

3.2 Control Functions

Four multi-function buttons are used to operate the scale.
Button
Primary ON / ZERO
Function
If scale is off,
(short
turns scale on.
press)
If scale is on, sets
zero.
Secondary Off
Function
If scale is on,
(long
turns scale off.
press)
Menu Yes
Function Accepts current
setting and
advances to the
next menu item
Target Shifts to next digit
Setting
Function

3.3 Basic Operation

3.3.1

Turning On

With the scale off, press the ON/ZERO
3.3.2

Turning Off

With the scale on, press and hold the ON/ZERO
3.3.3

Zeroing

Remove the load from the pan and press the ON/ZERO
Zero indicator turns on when the measurement is within ±1/4 d of the zero setting.
3.3.4

Taring

Semi-automatic Tare (Tare Button)
To store or change the Tare value, place an empty container on the pan and press the TARE button. The
Net weight and NET indicator will be displayed.
To clear the Tare value, remove the container from the pan and press the TARE button. The NET indicator
turns off and the gross weight will be displayed.
G/N/T
Momentarily
Displays Gross
Net and Tare
values
Units
Changes
weighing unit
No
Rejects current
setting or menu
item and
advances to the
next available
item
Increments value
of the active digit
Off
button. The scale performs a display test, then displays zero.
Off
button until OFF is displayed.
Off
button to set the display to zero. The Center of
TARGET
Initiates target
setting mode.
Menu
Enters menu
mode.
Back
Reverts back to
previous menu
item.
Accepts current
displayed value.
EN-9
TARE
Sets tare.
Clears tare, if pan
is empty.
None
Exit
• Immediately
exits menu
mode
• Aborts
calibration in
progress
Changes sign
(+ / –) of
displayed value.