Readout Sub-Menu - OHAUS FD Serie Manual De Instrucciones

EN-16
3.7.3

Readout sub-menu

Press Yes to enter the Readout sub-menu.
Reset
Press Yes to enter the Reset menu.
• No – does not change the Readout sub-menu settings.
• Yes – reset the Readout sub-menu to the factory
default settings (bold and underlined text herein).
Averaging Level
Press Yes to enter the Averaging Level menu.
• Lo – less filtering (faster stabilization time).
• Hi – more filtering (longer stabilization time).
Light
Press Yes to enter the Backlight menu.
• Off – turn display backlight off.
• On – turn display backlight on.
• Auto – automatically turns the display backlight on when
the scale is active and off after 5 seconds of inactivity.
Auto Off
Press Yes to enter the Auto-off menu.
• Off – disable auto off.
• On – turn the scale off after 5 minutes of inactivity.
Auto Zero tracking
Press Yes to enter the Auto Zero Tracking menu.
• 0.5 d – 1/2 division capture range.
• 1 d – 1 division capture range.
• 3 d – 3 division capture range.
• Off – disable Auto Zero Tracking.
Auto Tare
Press Yes to enter the Automatic Tare menu.
• Off – disable Automatic Tare.
• On – enable Automatic Tare.
End
• Press Yes to leave this sub-menu and go to the next.
• Press No to return to the top menu item in this sub-menu.
FD Series Scales
read
reset
AL
LIght
aOFF
azt
atare
end
No
yes
LO
HI
Off
On
Auto
OFF
On
0.5 d
1 d
3 d
OFF
OFF
On