Option Settings; Clock; Thermostat - GE PT920 Manual Del Propietário

Options–Settings
O
PTIONS
S
ETTINGS
T
EMP
S
ELECTION
T
EMPERATURE
O
FFSET
+1 ˚ –1 ˚
AND/OR
O
K
D
ONE
O
PTIONS
S
ETTINGS
C
LOCK
T
IME
S
ETTINGS
D
AYLIGHT
OR OR
12 H 24 H
OURS OURS
S
AVINGS
S
ET
T
IME
1 2 3 4
6 7 8 9
AM PM
OR
E
NTER
Make sure the clock is set to the
correct time of day.
32
Adjust the Oven Thermostat—Do It Yourself!
You may find that your new oven cooks differently
than the one it replaced. Use your new oven for a
few weeks to become more familiar with it. If you
still think your new oven is too hot or too cold,
you can adjust the thermostat yourself.
Do not use thermometers, such as
those found in grocery stores, to check the
temperature setting of your oven. These
thermometers may vary 20–40 degrees.
NOTE: This adjustment will only affect baking
and roasting temperatures; it does not affect
broiling, convection or self-cleaning temperatures.
The adjustment will be retained in memory after
a power failure.
To Set the Clock
The clock must be set to the correct time of day
for the automatic oven timing functions to work
properly. The time of day cannot be changed
during a timed baking or self-cleaning cycle.
Touch OPTIONS.
Touch SETTINGS.
Touch CLOCK.
Touch TIME SETTINGS.
Three options are available:
s
To set a 12 hour day time: Touch
12 HOURS , touch SET TIME, enter the
time in hours and minutes from 1:00
to 12:59, touch AM or PM, touch
START and touch OK.
5
s
To set a 24 hour (military) time: Touch
24 HOURS, touch SET TIME, enter the
0
time in hours and minutes from 00:01
to 23:59, touch START and touch OK.
s
To set for daylight savings time: Touch
DAYLIGHT SAVINGS, touch BACK 1
HOUR to fall back one hour or touch
FORWARD 1 HOUR to spring forward
one hour.
Touch SET TIME.
Touch the numbers to enter the
current time in hours and minutes.
Touch AM or PM.
Touch ENTER.
Touch OPTIONS.
Touch SETTINGS.
Touch TEMP SELECTIONS.
Touch TEMPERATURE OFFSET.
The oven temperature can be
adjusted up to (+) 35°F hotter or
(-) 35°F cooler. Touch + 1° v or
- 1° w to increase or decrease the
offset temperature in 1° increments.
When you have made the
adjustment, touch OK and DONE.
Use your oven as you would
normally.