OHAUS Scout SJX Serie Manual De Instrucciones página 4

TM
EN-2 SCOUT SJX SERIES BALANCES
2.1.1 Releasing the Transportation Lock
Release the red transportation lock by turning
Locked
the red pointer 90 degrees counter-clockwise
position
to unlock.
Unlocked
position
Figure 2-1. Transportation Lock
Note:
For SJXN models, the shipping lock needs to be removed (by pulling it out) before installing the
pan.
2.1.2 Installing the Weighing Pan
For SJX/E
Balances with a rectangular pan are placed into the sub-platform as shown and rotated counter-
clockwise until it locks. Round pans are placed straight down on sub-pan.
Figure 2-2. Pan Installation (for SJX/E)
For SJX
Install the stainless steel pan directly on the subplatform.
2.1.3 Security Slot
A security slot is provided at the rear of the balance allowing the balance to be secured by an
optional cable and lock accessory.
2.2 Selecting the Location
For best performance, the Scout balance should be used in a clean, stable environment. Do not
use the balance in environments with excessive drafts, with rapid temperature changes, near
magnetic fields or near equipment that generates magnetic fields, or vibrations.
2.3 Leveling the Balance
The Scout has an illuminated level indicator as a reminder that the balance should be leveled
for accurate weighing. There is a level bubble in a small round window on the front of the
Balance. To level the balance, adjust the feet at each corner until the bubble is centered in the
circle. Be sure the equipment is level each time its location is changed.
Figure 2-3. Level indicator