Additional Features; Connecting The Interface - OHAUS Scout SJX Serie Manual De Instrucciones

EN-14

4.6 Additional Features

Weigh Below Hook
The Scout Balance is equipped with a weigh below hook for weighing below the balance.
The weigh below hook on SJX/E models is located at the reverse side of the battery cover as
shown below (on SJX models it is located in the subplatform). To use this feature, remove the
red protective cover underneath for the weigh below opening.
Attention: Before turning the balance over, remove the Pan and Pan Support (if present) and
then set the transportation lock to "locked" position.
Weigh Below Protective Cover
The balance can be supported using lab jacks or any other convenient method. Ensure the
balance is level and secure and that the transportation lock has been released. Power on the
Balance, then use a string or wire to attach items to be weighed.

Connecting the Interface

Use an optional interface connectivity kit to
connect the balance either to a computer,
printer or OHAUS auxiliary display.
Below Interface kit accessories are
available:
RS232, USB Host, USB Device, Ethernet,
®*
Bluetooth .
* Interface kits may vary according to local regulations
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG,
Inc. and any use of such marks by OHAUS is under license.
Weigh Below
Hook (SJX/E)
Figure 4-2. Weigh below
Interface connection
TM
SCOUT SJX SERIES BALANCES
AC Adapter Jack
Figure 4-3. Rear of the balance
Security slot