Concept VP6010 Manual Del Usuario página 39

OPERATION
Before installing the battery, check if it is fully charged.
1. Press the ON/OFF switch (1) on the handle of the vacuum to turn the cleaner on.
2. You can regulate the speed of the vacuum/turbo nozzle with the speed control (3).
3. To turn the cleaner off, press the ON/OFF switch again.
Note: We recommend to use the maximum power of both the hand unit and the turbo nozzle in the case of heavily
soiled surfaces or medium or high pile carpets.
m
ACCESSORIES
Select the accessories according to the nature of the surface to be cleaned.
Mini turbo brush – suitable for bed linen, fabric, sofa, etc.
Slot nozzle – suitable for wall corners, car cushioning, radiators, etc.
d Slot nozzle with brush – suitable for bedding, fabric, sofa, etc.
EMPTYING THE DUST CONTAINER
To empty the dust container, press the empty button (7). Open the container, empty the dust and close the container
cover.
e
REMOVING THE FILTER
Turn the hand unit lid clockwise. Pull out the HEPA filter vertically after release.
The HEPA filter can be rinsed in water. Allow the HEPA filter to dry before returning it back to the hand unit.
m
0 VP6010
EN
39