Attaching The Brush; Removing The Brush - Steinbach Poolrunner Manual Original

Attaching the brush

Only attach the brush if it can assist cleaning (e.g. for removing a biofilm). In the case of
an incline, unevenness or too much dirt on the floor, the brush may have an adverse
effect on the cleaning result.
1. Press the brush strip
on the bottom of the filter unit
2. Make sure that the brush strip
completely engaged and fits tightly.
The brush is installed.

Removing the brush

1. Remove the filter unit (see section "Cleaning").
2. Open all latches on the top part of the
filter unit.
3. Separate the top and the bottom part of
the filter unit.
into the recess
6
.
3
has
6
3
6
3
4
5
37