AGV FLUID Manual De Instrucciones página 18

REMOVING/INSTALLING THE CAP PADDING
To remove the cap padding, uncouple the two front buttons and then the rear button (Fig. 30).
N.B. Remove the cap padding only AFTER detaching all the automatic fastening buttons to avoid damaging
the buttons themselves and/or tearing the fabric parts.
To re-assemble, repeat the operations in the reverse order.
USING THE SUN VISOR
For FLUID a hidden, internal sun visor is available which can be easily used from outside and dismantled
without using cleaning or replacement tools.
To use the sun visor, simply rest the palm of your hand on the large cover on the left of the helmet and turn it in
an anti-clockwise direction to lower the small visor and in a clockwise direction to raise it (Fig. 31).
REMOVING/INSTALLING THE SUN VISOR
The sun visor is in scratch-proof polycarbonate and is equipped with inserts that fit in the inner compartments
on the side of the cheek pads.
You are advised to carry out the following operations while resting the helmet on a flat surface.
To remove the sun visor, lower it completely and lift the normal visor until completely open.
Starting on one side of the helmet, hold the sun visor (Fig. 32) and remove it from its fastening by delicately
pulling it outwards. (Fig. 33)
Repeat the operation on the other side and remove it completely.
Do the opposite for installation.
WASHING THE INNER PARTS
After having removed the inner parts, the crown pad and cheek pads can be hand washed in warm water with
mild soap.
After washing, rinse in running water.
Do not wring and dry at room temperature away from direct sunlight.
COMPONENT LIST Fig. 34
1. VISOR
2. SUN VISOR
3. RIGHT VISOR MECHANISM COVER
4. AIR INTAKE
5. AIR INTAKE BUTTON
6. LEFT VISOR MECHANISM COVER/SUN VISOR MOVEMENT
7. CHINSTRAP
8. CAP PADDING
9. CHEEK PADS
10. NECK ROLL
EXTENDING THE WARRANTY
If you wish to obtain an extended warranty on the helmet purchased, go to the website www.agv.com, carefully
read the terms and conditions and fill in the registration form within 60 days of purchasing the helmet.
The extended warranty can have a variable duration, depending on the helmet model purchased. Further
information, together with the terms and conditions of the extended warranty, can be found in the aforesaid
section found on the website www.agv.com.
18