Kenwood FDM31 Instrucciones página 13

Using The Attachments
Refer to recommended usage chart
for each attachment.
14A
Plastic Blender
To Use Your Blender
Illustrations –
1 Fit the sealing ring into the blade
assembly - ensuring the seal is located
correctly in the grooved area.
Leaking will occur if the seal is damaged or
incorrectly fitted.
2 Hold the underside of the blade assembly
and insert the blades into the goblet - turn
anti-clockwise until it is secure. Refer to
the graphics on the underside of the blade
assembly as follows:
- Unlocked position
- Locked position
3 Put your ingredients into the goblet.
4 Fit the lid onto the goblet and turn clockwise
until it clicks. Fit the filler cap.
5 Place the blender onto the power unit, align
the on the blender with the
power unit and turn clockwise to lock
The appliance will not operate if the blender
is incorrectly fitted to the interlock.
14B
Glass Blender
To Use Your Blender
Illustrations –
1 Fit the sealing ring into the blade unit -
ensuring the seal is located correctly in the
grooved area.
Leaking will occur if the seal is damaged or
incorrectly fitted.
2 Screw the goblet onto the blade assembly.
Refer to the graphics on the underside of the
blade unit as follows:
- Unlocked position
- Locked position
3 Put your ingredients into the goblet.
4 Fit the lid to the goblet and push down to
secure. Fit the filler cap.
5 Place the blender onto the power unit, align
the on the blender with the
power unit and turn clockwise to lock
The appliance will not operate if the blender
is incorrectly fitted to the interlock.
(if supplied)
on the
.
(if supplied)
on the
.
Hints and Tips
When making mayonnaise, put all the
ingredients, except the oil, into the blender.
Remove the filler cap. Then, with the
appliance running, add the oil slowly through
the hole in the lid.
Thick mixtures, e.g. pâtés and dips, may need
scraping down. If the mixture is difficult to
process, add more liquid.
The processing of spices is not
recommended as they may damage the
plastic parts.
To blend dry ingredients - cut into pieces,
remove the filler cap, then with the appliance
running, drop the pieces down one by one.
Keep your hand over the opening. For best
results empty regularly.
Knife Blade
15
Follow the instructions under 'to use your food
processor'.
Hints and Tips
For coarser textures use the pulse control.
Cut food such as meat, bread, vegetables
into cubes approximately 2cm.
Biscuits should be broken into pieces
and added down the feed tube whilst the
appliance is running.
Take care not to over-process.
When making pastry use fat straight from
the fridge cut into 2cm cubes.
Dough Tool
16
Use for yeasted dough mixes.
Follow the instructions under 'To use your food
processor'.
Hints and Tips
Do not process for longer than 60 seconds.
Place the dry ingredients in the bowl and
add the liquid down the feed tube whilst the
appliance is running. Process until a smooth
elastic ball of dough is formed.
Re-knead by hand only. Re-kneading in the
bowl is not recommended as it may cause
the processor to become unstable.
Dual Whisk
17
Using The Whisk
1 Fit the drive shaft and bowl onto the power
unit.
2 Push each beater securely into the drive
head.
3 Fit the whisk by carefully turning until it
drops over the drive shaft.
7