Work And Safety Instructions; General; Mechanical Components - Festo 8127981 Instrucciones De Utilizacion

Electric gripper kit – Operating instructions

5 Work and safety instructions

5.1 General

5.2 Mechanical components

12
•
Apprentices should only work with the components and systems under the
supervision of an instructor.
• Observe the specifications included in the datasheets for the individual
components, and in particular all safety instructions!
•
Wear your personal protective equipment (safety goggles, safety shoes) when
working on the circuits.
•
Switch off the power supply!
– Switch off both the operating power and the control power before working on
the circuit.
– Only reach into the setup when it is at a complete standstill.
– Be aware of potential overtravel times for the actuators.
•
Risk of injury during troubleshooting!
Use a tool such as a screwdriver when actuating mechanical limit switches.
•
Mount all of the components securely onto the slotted profile plate.
•
Make sure limit switches are not actuated from the front.
•
Set all components up in a way that enables easy activation of the switches and
disconnectors.
•
Follow the instructions about positioning the components.
CAUTION
WARNING
CAUTION
© Festo Didactic 8150418