Yamaha BEARTRACKER YFM250XR Manual Del Propietário página 270

1. Oil filter cover
2. Oil filter element
3. O-ring
1. Couvercle du filtre à huile
2. Élément du filtre à huile
3. Joint torique
1. Tapa del filtro de aceite
2. Elemento del filtro de aceite
3. Junta tórica
5. Remove the oil filter cover and oil filter ele-
ment.
6. Clean the oil strainer and oil filter element
with solvent.
7. Inspect the O-ring and replace it if damaged.
8. Install the oil filter element, O-ring and oil filter
cover.
9. Install the oil strainer, compression spring,
O-ring and drain bolt.
10. Tighten the drain bolt and the oil filter cover
bolts to the specified torques.
CAUTION:
_
Before installing the drain bolt, be sure to in-
stall the O-ring, compression spring and oil
strainer.
_
Tightening torque:
Drain bolt (engine):
43 Nm (4.3 m·kgf)
Oil filter cover bolt:
10 Nm (1.0 m·kgf)
11. Fill the engine with oil and install the engine
oil filler cap.
8-17