Handlebar Switches - Yamaha BEARTRACKER YFM250XR Manual Del Propietário

1. Light switch "LIGHTS"
2. Engine stop switch "ENG. STOP"
3. Start switch "START"
4. Horn switch " "
1. Contacteur d'éclairage "LIGHTS"
2. Coupe-circuit du moteur "ENG. STOP"
3. Contacteur du démarreur "START"
4. Contacteur de l'avertisseur "
1. Interruptor de luces "LIGHTS"
2. Interruptor de paro del motor "ENG. STOP"
3. Interruptor de arranque "START"
4. Interruptor de la bocina "
"
"

Handlebar switches

Engine stop switch "ENG. STOP"
Make sure that the engine stop switch is in the
"RUN" position. The engine stop switch controls
ignition and can be used at all times to stop the en-
gine, especially in an emergency. The engine will
not start or run when the engine stop switch is
turned to "OFF".
Start switch "START"
The starter motor cranks the engine when this
switch is pushed.
CAUTION:
See starting instructions prior to starting en-
gine (see page 6-3 for details).
4-5
EBU00053
EBU00054
EBU00056