SMA SUNNY BOY 3.0 Instrucciones Breves página 163

Ocultar thumbs Ver también para SUNNY BOY 3.0:
Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 45
System data | System-Daten | Данни на системата | Systémové údaje  | System-data |
Στοιχεία συστήματος | Datos del sistema | Süsteemiandmed | Järjestelmätiedot |
Données du système | Podaci o sustavu | Rendszeradatok | Dati del sistema | Sistemos
duomenys | Sistēmas dati | Systeemgegevens  | Dane techniczne systemu | Dados do
sistema | Date despre sistem | Systémové údaje | Podatki o sistemu | Systemdata
Topology
Overvoltage category in accordance with IEC
60664-1
Protection class in accordance with IEC 61140
All-pole sensitive residual-current monitoring unit
Maximum permissible value for relative humi-
dity, non-condensing
Extended humidity range according to IEC
60721-3-4
Pollution degree inside the enclosure
Pollution degree outside the enclosure
Radio technology
Radio spectrum
Maximum transmission power
Local requirements
transformerless
II (DC), III (AC)
integrated
100 %
0 % to 100 %
WLAN 802.11 b/g/n
2.4 GHz
100 mW
NRS 97-2-1: This standard requires a separate
label attached to the AC distribution board,
which indicates the AC-side disconnection of the
inverter in case of a grid failure (for further
details, see NRS 97-2-1, Sect. 4.2.7.1 and
4.2.7.2)
AS 4777.3: If DRM support is specified, the
inverter may only be used in conjunction with a
Demand Response Enabling Device (DRED). The
inverter and the Demand Response Enabling
Device (DRED) must be connected in the same
network and the inverter Modbus interface must
be activated and the TCP server set.
SBxx-1AV-40-IS-xx-15
I
2
3
163

Publicidad

Tabla de contenido
loading

Tabla de contenido