Safety And User Information; Importantinformation; Graphic Symbols - Airplane VCR 1002 Manual De Instrucciones Y Mantenimiento

Fabrication Nº:
Equipment:
OPERATING INSTRUCTIONS AND MAINTENANCE MANUAL

2. SAFETY AND USER INFORMATION

2.1 IMPORTANTINFORMATION

These assembly and maintenance instructions apply exclusively to the equipment
detailed in section 3.1, manufactured by AIRPLAN as per the specifications of
Unipharma.
This instruction manual describes the equipment's characteristics and provides
instructions for its proper operation, in addition to containing safety notes to be
taken into consideration whenever the equipment is operating.
The personnel responsible for assembly, start-up and maintenance must be familiar
with these instructions before beginning.
The specifications in this manual must be followed. AIRPLAN SA takes no
responsibility for any damage that may be caused by not following these instructions,
or by undue use of the equipment.

2.2 GRAPHIC SYMBOLS

This manual contains a series of icons, whose purpose is to highlight the importance
of certain explanations and they are described below:
ICON DESCRIPTIÓN
Warning: electrical danger
Warns that the described operation implies a risk of physical harm if not
carried out respecting safety regulations.
Warning: General danger
The described operation implies a risk of physical harm if not carried out
respecting safety regulations.
Information:

Highly important information.
Warning:

Provides information that must be heeded to avoid harming the
equipment or personnel.
Ref. ProJect / Revision: 721021-07 / R01
721021-70-1 / 721021-70-3
VESSEL FOR CREAMS – Mod. VCR 1002 / MELT TANK – Mod. MET 0400
Client: UNIPHARMA
Date: 11-2015
EN
ES
MDI VCR (v1.0)
6 of 153