Intended Use; Safety Instructions - Fumpa Pumps WDCDSV20 Manual De Instrucciones

Please read and comply with
these instructions prior to
using your Fumpa.
EN

Intended use

Fumpa is intended for use as a portable air
compressor for pumping bicycle tyres up to 120psi.
Protect the unit from rain. Do not store
outside.
Using a Fumpa needle valve (sold separately), Fumpa
can be used to inflate sporting equipment such as
footballs, netballs and basketballs.
Fumpa can also be used to inflate car and motorcycle
tyres, but cannot inflate these tyres completely from
flat.
Fumpa is not to be used to inflate large volume
objects such as swimming pools, boats, beach balls
and large inflatable toys.
The manufacturer is not responsible for damage due
to incorrect operation.
Environmental protection
Fumpa contains a lithium battery.
Please dispose of Fumpa correctly.

Safety instructions

Fumpa is not to be used by children, unless
supervised by an adult. Fumpa is not a toy.
Risk of fire – Do not subject Fumpa to
temperatures exceeding 50
Fumpa in a hot car.
Risk of electric shock – never use Fumpa
with wet hands. Check the USB charge
cable for damage before use.
See drawings above (refer Figure 1).
Package contents:


1.
2.
3.
4.
5.
6.
7.
See drawings above (refer Figures 2, 3 and 4.)
Charge Fumpa by connecting the supplied USB cable
to the USB Charge Port. Connect the other end of the
USB cable to a PC or USB wall charger (not supplied).
The START/STOP button will glow red, indicating that
o
C. Do not leave
Fumpa is connected to the charger.
Risk of explosion – do not use Fumpa
near explosive or combustible gases,
liquids or reactive dust particles (such as
aluminium, magnesium or zinc).
Description of the unit
1 x Fumpa
1 x USB charge cable
ON/OFF switch.
START/STOP button – used to start and stop the
compressor inside the Fumpa. This button is also
used to change the pressure reading on the
display.
USB Charge Port.
Display – provides a gauge pressure reading to
the user, as well as displaying the battery's
charge at start-up.
Hose.
Nozzle – contains adaptors that allow
connection to both Presta and Schrader valves.
Casing.
Operation
Charging
Please fully charge Fumpa before its first
use. It takes about 2.5 hours to fully charge
the unit, depending on the charger used.
Do not use cheap, counterfeit wall
chargers to charge your pump!