Keep And Maintenance - Simon, Evers & Co K532 830 Manual De Instrucciones

Green light on: 70%-100%
Yellow light on: 40%-70%
Red light on: 10%-40%
Red light flashes: null
If red light is on, please prepare to charge the
truck; red light flashing is warning that the truck will
stop working and please charge it. If you continue to
use it, lithium battery will be disconnected, and truck
will be unable to travel.

6.Keep and maintenance

Whether the truck can serve satisfactorily depends on careful maintenance.
Neglect of maintenance may harm human body and damage cargo. Therefore,
when you use the truck, please conduct inspections timely, exclude abnormal
phenomenon, and never use a faulted truck in order to ensure safety and
prolong service life.
Maintenance: maintenance of the truck is divided into three levels, i.e.
daily maintenance, first level maintenance and second level maintenance.
Daily maintenance: conducted daily, mainly to keep truck surface clean
and check whether power wire is damaged.
First level maintenance: conducted weekly, mainly to check whether each
component functions normally, whether each fastener is fixed, whether there is
leakage, whether the mechanical part has abnormal wearing,and whether the
electrical part has abnormal temperature rise or sparks. For any abnormal
phenomena, adjust and exclude timely.
Second level maintenance: conducted periodically, and conduct full
inspections for the following aspects:
a.Mechanical maintenance: conducted half a year, mainly to check whether
any fastener becomes loose, whether each wheel turns flexibly, and whether
forks can lift and lower normally. After maintenance, the running noise shall not
exceed 75dB.
b.Hydraulic maintenance: conducted annually, mainly to check whether oil
cylinders are normal, whether there is inner or outer leakage, whether
hydraulic oil is clean, and replace hydraulic oil every 12 months generally. Adopt
ISO oil quality for hydraulic oil. When ambient temperature is -5 ~ 40 , a
L-HV32; when ambient temperature is -10 ~ -5 , adopt L
temperature hydraulic oil. The replaced wasted oil shall be disposed according
to local laws and regulations. Check whether limit valve works normally.
c.Electrical maintenance: conducted every three months, to check whether
each joint is reliable, whether switches are normal, and whether insulation is
~ 13 ~
red
yellow
green
℃
-HV15 low
℃
dopt