Simon, Evers & Co K532 830 Manual De Instrucciones página 33

normal (insulation resistance between electrical part and truck body shall be
greater than 0.5MΩ).
6.1 Adding hydraulic oil
Find oil adding port
Use wrench No. 5 to remove screw at
the adding port. The total required
adding amount is 250ml.
After oil has been added, lift and lower
for 2-3 times unladen, lift forks to the
maximum height, then fasten the screw.
If washer at the oil port is damaged,
replace it with a new washer.
~ 14 ~