Worx WG800E Traducción De Instrucciones Originales página 12

ADDITIONAL SAFETy
WARNINGS FOR CORDLESS
EDGING SHEAR
SAVE ALL wARNINGS AND
INSTRUCTIONS FOR FUTURE REFERENCE.
- This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities,
or lack of experience and knowledge,
unless they have been given supervision or
instruction concerning use of the appliance
by a person responsible for their safety.
- children should be supervised to ensure that
they do not play with the appliance.
If the supply cord is damaged, it must be
replaced by the manufacturer, its service
agent or similarly qualified persons in order
to avoid a hazard.
IMPORTANT
READ CAREFULLy bEFORE USE
KEEP FOR FUTURE REFERENCE
Safe operation practices
TRAINING
12
1) Read the instructions carefully. Be familiar
with the controls and the proper use of the
machine;
2) Never allow people unfamiliar with these
instructions or children to use the machine.
Local regulations can restrict the age of the
operator;
3) Keep in mind that the operator or user
is responsible for accidents or hazards
occurring to other people or their property.
PREPARATION
1) Never operate the machine while people,
especially children, or pets are nearby.
2) Wear eye protection and stout shoes at all
times while operating the machine.
OPERATION
1) Use the machine only in daylight or good
artificial light.
2) Never operate the machine with damaged
guards or shields or without guards or
shields in place.
3) Switch on the motor only when the hands
and feet are away from the cutting means.
4) Always disconnect the machine from the
Cordless shrub shear and edging shear
All manuals and user guides at all-guides.com
5) Take care against injury to feet and hands
6) Always ensure that the ventilation openings
MAINTENANCE AND STORAGE
1) Remove the disabling device before carrying
2) Use only the manufacturer's recommended
3) Inspect and maintain the machine regularly.
4) When not in use, store the machine out of
power supply (i.e. remove the plug from the
mains or remove the disabling device)
- Whenever leaving the machine unattended;
- Before clearing a blockage;
- Before checking, cleaning or working on the
machine;
- After striking a foreign object;
- Whenever the machine starts vibrating
abnormally.
from the cutting means.
are kept clear of debris.
out maintenance or cleaning work.
replacement parts and accessories.
Have the machine repaired only by an
authorized repairer.
the reach of children.
EN