Publicidad
Idiomas disponibles
Idiomas disponibles
OWNER'S
RESPONSIBIUTIES
Follow the hourly or calendar intervals, whichever occurs first.
More frequent service is required when operating in adverse conditions noted below.
_,IABNTENANCE SCHEDULE
FtLL tN DATES AS YOU
COMPLETE
REGULAR SERVICE
MAtNTENANCE
TASK
PRESSURE
WASHER
Check/clean
water inlet screen
Check high pressure
hose
Check chemical tanks and fiEters
Check spray gun and assembly for Eeaks
Purge pump of air and contaminants
Change pump o;I
Prepare pump for storage below 32°F
ENGINE
Before
1Each
Use
x _
x
x
x
x
SERVICE DATES
Every 25
Every 50 I Every 100
Hours or
Hours or
Hours or
Yearly
Year y
Yearly
x
See Storage on pages 19-20
SERVICE DATES
Check oil level
Clean debris
Change engine oil
Service air cleaner
Service spark plug
Service spark arrester
Clean coo_ing system
Prepare for storage
X
X
X 2
X s
X
X
X 2
If unit is to remain idle for longer than 30 days.
Clean if clogged.
Replace
if perforated
or torn.
Change oil after the first (5) operating hours and every 50 hours or yearly thereafter.
Change
sooner
when operating
under dirty or dusty conditions.
Reptace more often under dirty or dusty conditions.
GENERAL
RECOMMENDATIONS
Regular maintenance will improve the performance
and extend the life of the pressure washer. See any
authorized Sears dealer for service.
The pressure washer warranty does not cover items
that have been subjected to operator abuse or
negligence. To receive full value from the warranty,
the operator must maintain pressure washer as
instructed in this manual including proper storage as
detailed in "Storage" on pages 19-20.
Some adjustments will need to be made periodically to
properly maintain your pressure washer.
All service and adjustments
should be made at least
once each season. Follow the requirements
in the
"Maintenance Schedule" chart above.
NOTE: Once a year you should clean or replace the
spark plug and replace the air filter. A new spark plug
and clean air filter assure proper fuel-air mixture and
help your engine run better and last longer.
EM SSION
CONTROL
Maintenance, replacement or repair of the emission
control devices and systems may be performed by any
non-road engine repair establishment
or individual.
BEFORE
EACH USE
1.
Check engine oil level.
2.
Clean debris.
3.
Check water inlet screen for damage.
4.
Check in-line filter for debris.
5.
Check high pressure hose for leaks.
6.
Check chemical tanks and filters for damage.
7.
Check gun and nozzle extension assembly for
leaks.
8.
Purge pump of air and contaminants.
PRESSURE WASHER MAINTENANCE
Cban
Debris
Daily or before use, clean accumulated debris from
cleaning system. Keep linkage, spring and controls
clean. Keep area around and behind muffler free from
any combustible debris.
Cleaning system parts should be kept clean to reduce
the risk of overheating and ignition of accumulated
debris.
15
Publicidad
