Descargar Imprimir esta página

Craftsman 580.752810 Instrucciones De Uso página 5

7.0 potencia; 2900 psi; 2.3 gpm
Ocultar thumbs Ver también para 580.752810:

Publicidad

Idiomas disponibles

Idiomas disponibles

KNOW YOUR PRESSURE
WASHER
Read this owner's manual and safety rules before operating your cleaning
system,
Compare the illustrations with your cleaning system to familiarize yourself with the locations of various controls
and adjustments. Save this manual for future reference.
Spray Gun
Nozzle Extension with
Quick Connect
Chemical Reservoirs
ProjectPro
TM
Nozzles
High Pressure Hose
Recoil Starter
Fuel Tank
Air Filter
Choke Lever _
Throttle Lever
Hose Reel
Oil Fill Cap/Dipstick
High Pressure Outlet
Water inlet
Air Filter -- Protects engine by filtering dust and debris
out of intake air.
Automatic Cool Down System -- Cycles water through
pump when water reaches 125°-155°F. Warm water will
discharge from pump onto ground. This system prevents
internal pump damage.
Chemical
Reservoirs
= Used to provide detergent or
other chemicals to the low pressure water stream.
Choke Lever -- Prepares a cold engine for starting.
Dial-A-Cleaner
TM
Selector
Knob (not shown) =
Selects any one of three chemicals or the clean water
system rinse.
Fuel Tank -- Fill tank with regular unleaded fuel. Always
leave room for fuel expansion.
High Pressure Hose -- Connect one end to the water
pump and the other end to the spray gun.
High Pressure Outlet -- To connect high pressure hose.
Pump equipped with
Automatic Cool Down System
Hose Reel -- Used for storing hose while unit is not in
use. Hose must be detached from pump and spray
gun before storage.
Nozzle Extension with Quick Connect -- Allows you to
switch between four different spray nozzles.
Oil Fill Cap/Dipstick
-- Check and fill engine with oil
here. See page 7 for oil recommendations
and filling
instructions.
ProjectPro
TM
Nozzles -- Detergent, Max, General,
and Delicate Nozzle: for various cleaning applications.
Pump -- Develops high pressure.
Recoil Starter -- Use for starting the engine manually.
Spray Gun -- Controls the application of water onto
cleaning surface with trigger device. Includes trigger lock.
Throttle Lever--Sets
engine in starting mode for
recoil starter and stops a running engine.
Water Inlet -- Connect garden hose here.

Publicidad

loading