Becken BKM4570 Manual De Instrucciones página 14

NOTE:
1. You can add ingredients while the appliance is running by
removing the measuring cup from the jar lid.
2. It may be necessary to switch off the appliance from time to time
to remove pieces of food slicking into the blender jar.
• Switch off the appliance and unplug it from the mains.
• Remove the jar lid.
• Use a soft spatula to remove the pieces of food which have
slicked into the blender jar. Keep the spatula at a safe distance
from the knives.
• Turn the blender jar clockwise to take out the blender jar.
Recommended formulation:
Remove the fruit's kernel and hard peel, cut the fruit into small pieces
and place them in the cup, then pour in the corresponding amount of
pure water. The maximum amount of food is 600 g and water 900 g.
Do not exceed the maximum scale of the juice cup. Cover the cup with
its lid and load it into the machine. Plug the machine to the mains and
then set the speed control to position 4-6. After continuously operating
for 3 minutes please stop working. Do not continuously operate the
machine for more than 15 minutes. Please note that disregarding this
warning may affect the machine's performance.
Meat mincer Function:
How to use the mincer
1. To mount the mincer parts, first place the blade (16) on the end
of the helix (15) and then a sieve (17) of your choice. Please pay
attention to the sieve and the recesses on the helix housing (14).
Screw the lock (18) on until it is "hand tight" (FIG. 1).
2. Remove the front cover (FIG. 2) from the machine.
3. Press the fixed button and then place the helix housing into the
machine, turning it counter clockwise to lock (FIG. 3).
4. Place the filling tray (FIG. 4) on the filler neck.
5. Place a vessel under the exit.
14
BECKEN_manual_BKM4570 v2.indd 14 BECKEN_manual_BKM4570 v2.indd 14 03/12/2019 15:20 03/12/2019 15:20