Installation - Caberg JUST SPEAK Instrucciones De Uso

2 INSTALLATION

UK
Sistema Caberg Just Speak Per Sintesi/Sintesi Jet/Hyperx
1) Remove the inner lining and check pads.
2) Remove the cover on left side of the shell by
pushing forward the cursor.
3) Slip on the connector with 8 poles between
the EPS and the shell in order that the cable co-
mes out from the apposite slit. Connect the key
pad with the Connector and place it in its sea-
ting on the shell .
4) Fix the microphone arm in its apposite se-
ating A.
5)Make sure that the word STILO on the micro-
phone head is oriented towards your mouth.
36
ENGLISH
6) Insert battery into the dedicated slot on the
right hand side, between EPS foam and shell,
making sure that the protection plate placed
on the battery does not look towards the shell.
7) Insert the ear pads in the apposite seating on
the cheek pads.
8) Accommodate and fix properly all the cables
as shown in Pic. 8 and 11, then mount back the
inner lining and cheek pads. During this proce-
dure make sure not to damage the cables.
UK
37
ENGLISH