Bluetooth ® Music Player (A2Dp Profile); Functions With Bluetooth; Intercom - Caberg JUST SPEAK Instrucciones De Uso

3 FUNCTIONS
UK

3.3.2 Functions with Bluetooth

Switch on both CABERG JUST SPEAK systems. When the rider's helmet is
switched on it will seek the passenger's system and automatically establish
an intercom channel.
Note: So that the connection is made automatically when the systems are
switched on, we advise switching on the CABERG JUST SPEAK system
mounted on the passenger helmet first, then the rider's system.
Note: Some Bluetooth ® devices already connected to the system can
block the automatic connection described above. If this happens, con-
nect manually by pressing the
It is possible to activate and deactivate intercom communications at any time
by pressing the button briefly on either of the two CABERG JUST SPE-
AK systems.
Note: the CABERG JUST SPEAK may take several seconds to find the
other system, depending on connections already active and the Blue-
®
tooth devices present. After pressing the button,
for the search process to be completed.
Note: If Bluetooth ® connection does not take place automatically, simply
press the button briefly on either helmet to activate search and con-
nection.
Activate/deactivate Press button
intercom mode take a few seconds to detect the other CA-
BERG JUST SPEAK.
When two CABERG JUST SPEAK systems become too far apart, the audio
quality deteriorates significantly and the connection between the two is lost.
44
ENGLISH
®

intercom

button briefly.
leave enough time
briefl y. The system may
The two CABERG JUST SPEAK will connect again automatically a few sec-
onds after they are once again within maximum radio signal range.
Note: If they are not reconnected automatically, simply press the
ton briefly.
®
3.4 Bluetooth music player (a2dp profile)
It is possible to listen to high sound quality music by connecting the CABERG
JUST SPEAK system to a music player featuring Bluetooth
Audio Distribution Profile).
3.4.1 Pairing with A2DP devices
To pair with a device featuring Bluetooth
cellphone (paragraph 3.2.1). When a code is requested, insert 0000 (four zeroes).
Note: Refer to music player instruction manual for more information.
Note: If a phone with Bluetooth ®
ed, it is not necessary to repeat the pairing process, as the presence of
the A2DP protocol has already been stored in memory during the phone
pairing procedure. The first time it is used, the cellphone must be con-
nected and its player switched on for the system to recognise it.
3.4.2 Operating with A2DP music player
On first use, connect the previously paired music player according to the pro-
cedure for the music player and start playing music. It will then be possible
to connect and start playing music directly from the CABERG JUST SPEAK
system (for players allowing this feature).
Warning: The CABERG JUST SPEAK system features Bluetooth
® A2DP (Advanced
® A2DP, proceed as for pairing with a
A2DP music player is already connect-
ENGLISH
UK
but-
®
45