About Average Reading; About Memory - A&D Medical LifeSource UB-328 Guía De Instrucción

All manuals and user guides at all-guides.com
The UB-328 provides an average blood pressure reading based on the
total measurements stored in memory. When the memory button is
pressed, the average blood pressure reading will appear with the num-
ber of measurements stored in memory displayed at the bottom of the
screen. The average reading display will disappear in approximately
five seconds.

ABOUT MEMORY

The UB-328 automatically stores up to 30 blood pressure and pulse
measurements in its memory. Measurements stored in memory are
assigned an index number in the order of the newest to the oldest.
The oldest reading displays as "no.1".
To retrieve readings, follow these simple steps:
1 .
When the display screen is blank, press the MEMORY button.
The average blood pressure reading will appear for five seconds.
Press the memory button again to access readings store in memo-
ry immediately.
2 .
The Memory index number of the newest reading (e.g. no.6)
appears followed by the measurement. The UB-328 displays the
readings twice and then shuts off automatically.
3 .
To retrieve other measurements in memory, press and release the
MEMORY button repeatedly until the desired index
number is reached (e.g. no.5). The measurement will then
be displayed.
To clear the measurement history from memory, remove the
batteries from the unit and then place the batteries back into the bat-
tery holder.
NOTE: If there are no measurements in memory, you will see
the index number "no .1" followed by a measurement of three
0's displayed vertically .
NOTE: Stored measurements will be lost if batteries become low
or are removed .
In Canada (Toll-Free): 1-800-463-5414

ABOUT AVERAGE READING

E-7