Before Commissioning; Safety; Proper Use; Mains Connection - Fronius Acctiva Seller Manual De Instrucciones

Before commissioning

Safety

The charger is only to be used for charging batteries as described in the „Technical data"

Proper use

section and is intended exclusively for supporting the electrical systems of cars in
showrooms. Utilisation for any other purpose, or in any other manner, shall be deemed
to be „not in accordance with the intended purpose". The manufacturer shall not be liable
for any damage resulting from such improper use. Utilisation in accordance with the
„intended purpose" also includes
-
-

Mains connection

The rating plate, which is located on the housing, contains information about the permit-
ted mains voltage. The charger is designed for this mains voltage only. The fuse protec-
tion required for the mains lead can be found in the „Technical data" section. If there is
no mains cable or mains plug on your machine, fit one that conforms to national stan-
dards.
All manuals and user guides at all-guides.com
WARNING! Operating the equipment incorrectly can cause serious injury and
damage. Do not use the functions described until you have thoroughly read
and understood the following documents:
- Operating instructions
- All the operating instructions for the system components, especially the
safety rules
- Battery and vehicle manufacturers' operating instructions and safety rules
following all the instructions in these operating instructions
regular checking of mains and charging cables
WARNING! Charging dry batteries (primary cells) and non-rechargeable
batteries can cause serious injury or damage, and is therefore prohibited.
NOTE! Inadequately dimensioned electrical installations can lead to serious
damage. The incoming mains lead and its fuse must be dimensioned to suit the
local power supply. The technical data shown on the rating plate applies.
3