Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

All manuals and user guides at all-guides.com
time by five minutes. Press once again on "PROG". Time and "PROG"
are displayed.
Now your appliance is in "programmation" mode. Once the setting
hour has come, you hear a beep and a red pilot light goes on. The
appliance starts to steam according to your settings. If you want to
cancel the "programmation" mode, press the "PROG" button, the
appliance comes back to clock mode.
Once the steaming is over, the appliance comes back to "holding"
mode, the symbol
Every 8 minutes, the holding mode warms the food for 2 minutes
after the end of cooking time.
Press "0/1" to come back to the clock mode.
Whatever the mode (steaming, programmation, holding...) the
appliance stops automatically once all the water has run out.
Hints:
When cooking rice, we advise you to cover it with hot water in
order to accelerate the cooking process.
It is possible to cook food with very different cooking times but this
needs frequent operations to take away the food that will be
ready. To avoid this, it is recommended to prepare food with
similar cooking time.
Frozen food does not need to be defrosted, but its cooking time
will be longer.

CARE AND CLEANING

Empty the water tank and clean it with a damp cloth
Descale the appliance every 8 times. To proceed, position the
ring upside down around the heating element (the largest side
up). Fill the water tank with cold water up to "max." level, fill the
inside of the ring with vinegar up to the same level. Leave
overnight to descale. Rinse out the inside of water tank with warm
water several times.
The baskets, the drip tray and the lid may be washed with soapy
water or in the dishwasher. Never use abrasive cleaners to clean
your appliance: it could damage the surfaces.
is displayed and a green pilot light goes on.
8
Assembly page 8/48
USK DG 1 - 080214

Publicidad

Tabla de contenido
loading

Tabla de contenido