Panasonic SC-HC58 Instrucciones De Funcionamiento página 11

Directly streaming to this unit
With this function set to "ON", you can stream music
from the iOS device or Mac / PC (iTunes 10.2.2 or
later) to this unit without the need of a wireless network
router.
≥ Previous network settings will be deleted when this
function is set to "ON".
≥ The following explanations are based on an iPhone.
1
Press [SETUP] repeatedly to select
"D.CONNECT".
2
Press [3, 4] to select "ON" and then press [OK].
3
Press [3, 4] to select "OK? YES" and then press
[OK].
"PW _ _ _ _ _ "* is displayed.
1
The 5 digits after "PW" is the password for this
network.
4
Connect your iPhone to this unit's wireless
network named "HC58 _ _ _ _ _ _"*
̲ ̲ ̲ ̲ ̲ ̲
5
Enter the password that is indicated on this unit's
display.
6
Once the iPhone is connected to this unit's
wireless network, the setup is completed.
̲ ̲ ̲ ̲ ̲ ̲
7
Continue to step 2 of "Using AirPlay with this unit's
speakers" (l 10).
≥ This setting is reset to "OFF" when other network settings are
performed. (l 7)
≥ When "D.CONNECT" is set to "ON", this unit will not be
connected to the Internet. It is not possible to update the
software or check the Wi-Fi signal strength.
≥ When AirPlay is not being used, disconnect the AirPlay
compatible device from this network.
≥ When using a computer on this network, make sure that all
the shared files are encrypted.
≥ This feature is only compatible with the "Open System"
authentication method. It is not compatible with "Shared Key"
authentication method.
All manuals and user guides at all-guides.com
The first time "D.CONNECT" is set to "ON", a
password for this unit's wireless network is randomly
created and memorised in this unit.
≥ This password is memorised until it is changed.
1
2
3
4
1
2
2 .
3
4
5
∫ Note about changing the password
After changing this unit's wireless network password, if
you are not prompted to change the password on the
other devices, the following changes are required.
iOS device (iPod touch/iPhone/iPad)*
≥ Before choosing this unit's network,
1
2
3
Mac/PC:
≥ If the computer has memorised the old password, be
sure to change the memorised password for this
unit's wireless network to the new one.
≥ Refer to the devices's operating instructions for details.
*1: " _ " stands for a digit.
*2: " _ " stands for a digit that is unique to each set.
*3: Steps are based on iOS 6.0.1.
Display the password
While "D.CONNECT" is set to "ON":
Press [SETUP] repeatedly to select
"D.CONNECT".
Press [3, 4] to select "ON" and then press [OK].
The current password is displayed.
≥ The 5 digits after "PW" is the password for this
network.
Press any button to exit.
Change the password
While "D.CONNECT" is set to "OFF":
Press [SETUP] repeatedly to select
"D.CONNECT".
Press [3, 4] to select "CHANGE PW" and then
press [OK].
Press [3, 4] to select "OK? YES" and then press
[OK].
The new password is displayed.
≥ The 5 digits after "PW" is the new password for
this network.
Press any button to exit.
Select [ ] located beside this unit's wireless
network name.
Select "Forget this Network" and then select
"Forget".
Select this unit's wireless network and enter the
new password.
:
3
11
RQT9759