Sound Adjustment; Clock And Timer; Setting The Timer - Panasonic SC-HC58 Instrucciones De Funcionamiento

Sound adjustment

The following sound effects can be added to the audio
output.
1
Press [SOUND] repeatedly to select the effect.
2
Press [3, 4] to select the setting and then press
[OK].
Direct-Vocal
Surround
(D.SURROUND)
Preset EQ
(PRESET EQ)
Bass (BASS) or
Treble (TREBLE)
Dynamic Bass
(D.BASS)
≥ You may experience a reduction in sound quality when these
effects are used with some sources. If this occurs, turn the
sound effects off.

Clock and Timer

Setting the clock
This is a 24-hour clock.
1
Press [SETUP] repeatedly to select "CLOCK".
2
Press [3, 4] to set the time and then press [OK].
≥ To display the clock, press [SETUP] to select "CLOCK" and
then press [OK] once. The time is displayed for 10 seconds.
(During standby, press [DISPLAY] once.)
≥ The clock is reset when there is a power failure or when the
AC mains lead is removed.
≥ Reset the clock regularly to maintain accuracy.
16
RQT9759
All manuals and user guides at all-guides.com
"LEVEL 1", "LEVEL 2" or "OFF".
≥ The factory preset is "OFF".
"HEAVY" (heavy), "SOFT" (soft),
"CLEAR" (clear), "VOCAL"
(vocal) or "FLAT" (flat/off).
≥ The factory preset is "HEAVY".
Adjust the level (j4 to i4).
"ON D.BASS" or "OFF D.BASS".
≥ The factory preset is "ON D.BASS".
Play timer
You can set the timer so this unit turns on at a certain
time every day.
Preparation
Set the clock (l left).

∫ Setting the timer

1
Press [SETUP] repeatedly to select "TIMER ADJ".
2
Press [3, 4] to set the starting time
("ON TIME") and then press [OK].
3
Press [3, 4] to set the finishing time
("OFF TIME") and then press [OK].
∫ Turn the timer on
1
Select the music source*
volume.
2
Press [SETUP] repeatedly to select "TIMER SET".
3
Press [3, 4] to select "SET" and then press [OK].
≥ "F" is displayed.
≥ To turn the timer off, select "OFF".
4
Press [Í] to turn the unit off.
≥ To display the timer settings, press [SETUP] repeatedly to
select "TIMER ADJ" and then press [OK] once.
The music source and volume will also be displayed if the
timer is turned on.
≥ During standby, if the timer is turned on, press [DISPLAY]
twice to display the settings.
≥ This unit can be used as normal after the timer is set,
however:
– Turn the unit to standby mode before the timer start time.
– Even if the audio source or the volume is changed, the
timer will still use the audio source and volume that was
set when the timer was turned on.
*1: "CD", "USB", "IPOD_PORT", "IPOD_DOCK" and "FM" can
be set as the music source.
Sleep timer
The sleep timer can turn the unit off after a set time.
1
Press [SETUP] to select "SLEEP".
2
Press [3, 4] to set the time (in minutes) and then
press [OK].
"SLEEP 30" ,. "SLEEP 60" ,. "SLEEP 90" ,. "SLEEP 120"
^------------------------.
OFF (Cancel)
≥ The remaining time is indicated on the unit's display
except when other operations are performed.
≥ The play timer and sleep timer can be used together.
The sleep timer always has priority.
and set the desired
1
(------------------------J