SICK WSE16 Serie Instrucciones De Uso página 10

6
COMMISSIONING
10
Align the sender with the receiver. Select the position so that the red emitted light beam
hits the receiver. Tip: Use white paper or a reflector as an alignment aid. The sender
must have a clear view of the receiver, with no object in the path of the beam
You must ensure that the optical openings (front screen) of the sensors are completely
clear.
Align the sender with the receiver. Select the position so that the infrared light (not visi‐
ble) hits the receiver. The correct alignment can only be detected via the LED indicators.
see figure 4, figure 5 and
with no object in the path of the beam. You must ensure that the optical openings (front
screen) of the sensors are completely clear.
Figure 4: Alignment 1
Sensing range
Observe the application conditions: Adjust the distance between the sender and the
receiver according to the corresponding diagram [see
operating reserve).
If several through-beam photoelectric sensors which are installed next to one another
are to be used, we recommend swapping the sender/receiver arrangement at every
second through-beam photoelectric sensor and ensuring that there is sufficient dis‐
tance between the through-beam photoelectric sensors. By doing this, mutual interfer‐
ence can be prevented [see
Function reserve
1,000
WSE16P-xxxxx1xx, WSE16I-xxxxx1xx
100
10
1
0 10 20
(0.39) (0.79) (1.18)
Figure 6: Characteristic line 1
table 4. The sender must have a clear view of the receiver,
WSO
WEO
Figure 5: Alignment 2
figure 3].
1
0
0
Sensing range
Figure 7: Bar graph 1
30 40 50
(1.57) (1.97)
Distance in m (feet)
[figure
WEO
figure 6] (x = sensing range, y =
30
10 20 30 40
(32.81) (65.62) (98.43) (131.23)
Distance in m (feet)
Sensing range typ. max.
8020353 | SICK
Subject to change without notice
4].
45
50
(164.04)