Additional Settings (Option); Resetting The Adjustments (Reset) - Sun Microsystems GDM-5510 Manual De Instrucciones

Additional settings (OPTION)

You can lock the controls, change the on-screen language, change
the menu position, and set the COLOR mode.
1
Press the MENU button.
The menu appears on the screen.
2
Move the control button up or down to highlight
OPTION and press the control button.
The OPTION menu appears on the screen.
3
Move the control button up or down to select the
desired adjustment item.
Adjust the selected item according to the following
instructions.
x Locking the controls (CONTROL LOCK)
You can protect the adjustment data by locking the controls.
Move the control button up or down to highlight
(CONTROL LOCK) and press the control button.
Then move the control button up or down to select ON
and press the control button.
Only the ! (power) switch, MENU button, INPUT switch, and
(CONTROL LOCK) of the
If any other items are selected, the
screen.
To cancel the control lock
Repeat the procedure above and set
x Changing the on-screen language
(LANGUAGE)
See page 6.
x Changing the menu's position
(OSD POSITION)
Change the menu's position if it is blocking an image on the
screen.
Move the control button up or down to select
POSITION) for horizontal adjustment, or
POSITION) for vertical adjustment and press the
control button. Then move the control button up or
down to shift the on-screen menu.
x Setting the COLOR mode
See page 12.
OPTION menu will operate.
mark appears on the
(CONTROL LOCK) to OFF.
(OSD
(OSD
14

Resetting the adjustments (RESET)

This monitor has the following 2 reset methods.
x Resetting all the adjustment data for the
current input signal
1
Press the MENU button.
The menu appears on the screen.
2
Move the control button up or down to highlight
0 RESET and press the control button.
3
Move the control button up or down to select 01
(CURRENT MODE) and press the control button.
4
Move the control button up or down to select OK
and press the control button.
RESET
1
2
CURRENT
MODE
Note that the following items are not reset by this method:
• on-screen menu language (page 6)
• color mode setting in the OPTION menu (EASY, PRESET,
EXPERT, sRGB) (page 12, 13)
• color temperature setting in the PRESET mode (5000K,
6500K, 9300K) (page 12)
• on-screen menu position (page 14)
x Resetting all of the adjustment data for all
input signals
Select 02 (ALL MODES) in step 3 above.
Note
The RESET function does not function when
is set to ON.
OK
CANCEL
X I T :
E
MENU
(CONTROL LOCK)
EN