Identifying Parts And Controls - Sun Microsystems GDM-5510 Manual De Instrucciones

Identifying parts and controls

See the pages in parentheses for further details.
Front
INPUT
1 2
12
1 INPUT (input) switch (page 6)
This switch selects the INPUT 1 (video input 1 (13W3)
connector: y1) or INPUT 2 (video input 2 (HD15)
connector: y2).
2 MENU button (page 7)
This button is used to display or close the menu.
3 Control button (OK, M/m) (page 8)
This button is used to make adjustments to the monitor and
call up the CONTRAST menu directly.
4 ! (power) switch and indicator (pages 5, 15, 19)
This button turns the monitor on and off. The power indicator
lights up in green when the monitor is turned on, and lights up
in orange when the monitor is in power saving mode.
5 AC IN connector (page 5)
This connector provides AC power to the monitor.
6 Video input 2 connector (HD15) (page 5)
This connector inputs RGB video signals (0.700 Vp-p,
positive) and sync signals.
7 Video input 1 connector (13W3) (page 5)
This connector inputs RGB video signals (0.700 Vp-p,
positive) and sync signals.
MENU
OK
3 4
Rear
5 6
AC IN
6 HD15
5 4 3 2 1
10 9 8 7 6
15 14 13 12 11
No. 6 Signal
A1 –––
A2 –––
A3 –––
1 Red
2 Green
(Composite Sync on Green)
3 Blue
4 ID (Ground)
5 DDC Ground*
6 Red Ground
7 Green Ground
8 Blue Ground
9 DDC + 5V*
10 Ground
11 ID (Ground)
12 Bi-Directional Data (SDA)* –––
13 H. Sync
14 V. Sync
15 Data Clock (SCL)*
* DDC (Display Data Channel) is a standard of VESA.
**Pins serve a dual purpose as combined sync input and as H.sync input
if V.Sync is present on pin no. 7.
4
2
1
7
7 13W3
5 4 3 2 1
10 9 8 7 6
A3 A2 A1
7 Signal
Red
Green
Blue
Data Clock (SCL)*
DDC + 5V*
–––
DDC Ground*
C Sync**
Bi-Directional Data (SDA)*
V. Sync
ID (100Ω)
ID (100Ω)
Ground
–––
–––
–––
–––
EN