Adjusting The Brightness And Contrast (Contrast/Bright) - Sun Microsystems GDM-5510 Manual De Instrucciones

x Using the MENU and control buttons
1
Display the menu.
Press the MENU button to display the menu on the screen.
MENU
2
Select the menu you want to adjust.
Highlight the desired menu by moving the control button up
or down. Then press the control button.
OK
3
Adjust the menu.
Move the control button up or down to make the adjustment
and press the control button.
If you want to select another menu;
move the control button up or down to select
control button to exit the menu.
OK
4
Close the menu.
Press the MENU button. If no buttons are pressed, the menu
closes automatically after about 45 seconds.
MENU
OK
and press the
OK
8
Adjusting the brightness and
contrast (CONTRAST/BRIGHT)
These settings are stored in memory for the signals from the
currently selected input connector.
1
Press the MENU button.
The menu appears on the screen.
2
Move the control button up or down to highlight
Then press the control button.
The CONTRAST/BRIGHT menu appears on the screen.
3 Move the control button up or down to highlight 6
or . Then press the control button.
4
Move the control button up or down to adjust the
contrast (6) or brightness (
control button.
If you are using the sRGB mode
If you selected the sRGB mode in the COLOR MODE (
OPTION ( ) menu, the following CONTRAST/BRIGHT menu
appears on the screen.
CONTRAST
s
You cannot adjust the contrast (6) or brightness (
screen. If you want to adjust them, select a mode other than sRGB
in the COLOR MODE ( ) of the OPTION (
For more information about using the sRGB mode, see
"Adjusting the color of the picture (COLOR)" on page 12.
). Then press the
) of the
/ BR GHT I
RGB
: /
EX I T :
MENU
) on this
) menu.
.
EN