Publicidad
Idiomas disponibles
Idiomas disponibles
C2. USE TOP CABINET TEMPLATE FOR PREPARA-
TION OF TOP CABINET
You need to drill holes for the top support screws and a
NOTE: Adjust top template accordingly if the microwave
is being spaced out from the wall due to cabinet depth
(including cabinet doors) of more than 13".
CABINET TEMPLATE.
CAUTION:
cabinet bottom.
C3. CHECK BLOWER PLATE
of the unit facing up.
on the unit.
C4. MOUNT THE MICROWAVE OVEN
IMPORTANT: Do not grip or use the handle or heat
shield during installation. Do not remove the cardboard
spacers between the heat shield and door.
NOTE: If your cabinet is metal, use the nylon grommet
around the power cord hole to prevent cutting of the cord.
NOTE:
front hangs below the cabinet bottom shelf.
19
Blower Plate
IMPORTANT:
may occur from overtightening screws.
microwave oven, thread power
cord through hole in bottom
of top cabinet. Keep it tight
pinch cord or lift oven by pulling
cord.
2. Rotate front of oven
up against cabinet
bottom.
hole. Temporarily secure the oven by turning the screw
at least two full turns after the threads have engaged.
(It will be completely tightened later.) Be sure to keep
power cord tight. Be careful not to pinch the cord,
cabinet.
Cabinet Front
Cabinet Bottom Shelf
Microwave Oven Top
4. Attach the microwave oven to the top cabinet.
through outer top cabinet
holes. Turn two full turns on
each screw.
EN
1. Lift microwave, tilt it
forward, and hook slots
at back bottom edge
onto four lower tabs of
mounting plate.
Filler Block
Equivalent to Depth
of Cabinet Recess
Self-Aligning Screw
Publicidad
