Descargar Imprimir esta página

Important Safety Instructions; Electrical Requirements - IKEA VALSKAPT Manual

Ocultar thumbs Ver también para VALSKAPT:

Publicidad

Idiomas disponibles

Idiomas disponibles

IMPORTANT SAFETY INSTRUCTIONS

This product requires a three-prong grounded outlet. The
installer must perform a ground continuity check on the
power outlet box before beginning the installation to
ensure that the outlet box is properly grounded. If not
properly grounded, or if the outlet box does not meet
electrical requirements noted
(under ELECTRICAL REQUIREMENTS), a qualified
electrician should be employed to correct any
deficiencies.
CAUTION: For personal safety, remove house fuse or
open circuit breaker before beginning installation to avoid
severe or fatal shock injury.
CAUTION: For personal safety, the mounting surface
must be capable of supporting the cabinet load, in addi
kg) product, plus additional oven loads of up to 50 pounds
kg).
CAUTION: For personal safety, this product cannot be
installed in cabinet arrangements such as an island or
a peninsula. It must be mounted to BOTH a top cabinet
AND a wall.
NOTE: For easier installation and personal safety, it is
recommended that two people install this product.
SAFETY, THIS APPLIANCE MUST BE PROPERLY GROUNDED
TO AVOID SEVERE OR FATAL SHOCK.
3
Ensure proper
ground exists
before use
prong (grounding) plug which mates with a standard
You should have the wall receptacle and circuit checked
properly grounded.
tered, it is very important to have it replaced with a prop
DO NOT, UNDER ANY CIRCUMSTANCES, CUT, DEFORM OR

ELECTRICAL REQUIREMENTS

kilowatts. This product must be connected to a seperate
and dedicated supply circuit of the proper voltage and
the National Electrical Code or the prevailing local code for
this kilowatt rating.
The power supply cord and plug should be brought to a
single grounded outlet. The outlet box should be located
in the cabinet above the microwave oven. The outler box
and supply circuit should be installed by a qualifed electri
cian and conform to the National Electrical Code or the
prevailing local code.
EN

Publicidad

loading