Device Protections - Teka IBC 63 BF100 Manual De Instrucciones

To unlock the controls
1� Make sure the Induction hob is turned on�
2� Touch and hold the keylock control for a while�
3� You can now start using your Induction hob�
When the hob works in keylock mode, all the controls are disabled except
for the ON/OFF control� You can always turn the induction hob off with
the ON/OFF control in an emergency, but you'll need to unlock the hob
first before you can make any further operations�

Device protections

Over-temperature protection
A built-in temperature sensor can monitor the temperature inside the Induction hob�
When an excessive temperature is monitored, the Induction hob will stop operation
automatically�
Over-spillage protection
Over-spillage protection is a safety protection function� It switch off the hob
automatically within 10s if the water flow to the control panel, while buzzer will
beep 1 second�
Detection of small articles
When an unsuitable size or non-magnetic pan (e�g� aluminum), or some other small
item (e�g� knife, fork, key) has been left on the hob, the hob will automatically enter
standby mode in 1 minute� The fan will keep cooling down the induction hob for a
further minute�
Auto shutdown protection
Auto shut down is a safety protection function for your induction hob� The hob will
shut down automatically if you forget to finish your cooking� The default working
time for various power levels are shown in the below table:
Power level
Default working time
(hour)
When the pot is removed, the induction hob can stop heating immediately and the
hob automatically switch off after 2 minutes�
People with a pacemaker should consult with their doctor before using
this unit�
1 2 3 4
8 8 8 4
EN-19
5 6 7 8
4 4 2 2
9 A II
2 1 2