GRAPHITE 58G486 Instrucciones De Uso página 17

TOUCH POWER CORD BEFORE DISCONNECTING FROM THE POWER SUPPLY.
l) If the saw is equipped with laser, replacement with laser of another type is forbidden and all repairs
must be carried out by the service. Do not aim the laser beam at people or animals.
m) Do not use the tool in stationary mode. It is not designed for use with sawing table.
n) Fix processed material to stable surface and secure with clamps or vice to eliminate shifting. This kind of
work piece fixation is safer than holding the work piece in hand.
o) Wait until blade comes to a complete stop before putting the power tool away. Cutting blade may jam
and cause loss of control over the power tool.
CAUTION! This device is designed to operate indoors.
The design is assumed to be safe, protection measures and additional safety systems are used,
nevertheless there is always a small risk of injuries at work.
CONSTRUCTION AND USE
Circular saw is a hand-held power tool with insulation class II. It is driven by a single-phase commutator
motor. This type of power tools is widely used for cutting wood and objects made of wood-like materials
that match with the tool size. Do not use the saw for cutting firewood. Attempts to use the circular saw
for purposes other than specified will be considered an improper use. Use the circular saw only with
appropriate cutting blades with teeth with sintered carbide tips. Circular saw is designed for light duty
works in service workshops and any individual, amateur activities (tinkering).
Use the power tool according to the manufacturer's instructions only.
DESCRIPTION OF DRAWING PAGES
Below enumeration refers to the device elements depicted on the drawing pages of this manual.
1. Dust extraction outlet
2. Upper guard
3. Lower guard lever
4. Parallel guide locking knob
5. Saw base
6. Cutting blade
7. Collar washer
8. Bolt for cutting blade fixing
9. Lower guard
10. Spindle lock button
11. Front handle
12. Cutting depth locking lever
13. Switch
14. Switch lock button
15. Main handle
16. Brush cover
17. Knob for base bevel adjustment
18. 0
marker for bevel cutting
0
19. 0
marker for perpendicular cutting
0
* Differences may appear between the product and drawing
MEANING OF SYMBOLS
CAUTION
WARNING
ASSEMBLY/SETTINGS
INFORMATION
17