Symbols On The Product; Safety Instructions; About This Chapter; Intended Use - Bosch Rexroth NEXO Serie Manual Del Usuario

Nexo | 36088703D0/2014-04

1.3.3 Symbols on the product

Table 4:
Symbol
1.3.4 Designations
This documentation uses the following designations:
Table 5:
Designation
NXA
NXP
NEXO-OS
2
These operating instructions provide the general safety requirements and important information on the
safe commissioning and operation of the product.
2.1
The product has been manufactured according to the accepted rules of current technology. There is,
however, still the risk of personal injury or damage to equipment if this chapter and the safety instructions
in this documentation are not complied with.




2.2
The product is partly completed machinery in the sense of the Machinery Directive 2006/42/EC, see "CE
Declaration of Conformity" page 40 ff.
You may use the product as follows:
• for integration in partly completed machinery or in a machine and/or system,
• for performing tightening operations requiring an uninterrupted torque development.
LSA Control S.L. www.lsa-control.com comercial@lsa-control.com (+34) 960 62 43 01
Meaning of the symbols
Meaning
Read all safety instructions and instructions.
Non-compliance with the safety instructions and instructions may cause electric shock, fire and/or
serious injuries.
For EU countries only:
According to the European directive 2002/96/EC electric tools that can no longer be used and
according to the European directive 2006/66/EC defective or drained accumulators/batteries must be
collected separately and recycled in line with environmental regulations.
Designations
Meaning
Right-angle nutrunner
Pistol grip nutrunner
Operating system

Safety instructions

About this chapter

Read this documentation thoroughly and completely before commissioning and working with the
product.
Follow all safety instructions referring to transport, storage, assembly, commissioning, and operation.
Keep this documentation in a location where it is accessible to all users at all times.
Always include the required documentation when you pass the product on to third parties.

Intended use

This product is not suitable for tightening processes requiring a stepwise tightening of the
connection elements, e.g. impact wrenches.
Bosch Rexroth AG 25/264
Betriebsanleitung | AB