Maintenance; Scheduled Maintenance Chart; Engine Oil; Engine Oil Requirements - Champion Global Power Equipment 100199 Manual Del Operador

Before performing maintenance procedures, review SAFETY
section starting on page 7.
Ensure that the ATS and Engine Switches are in the OFF position
before performing any maintenance or cleaning.
SCHEDULED MAINTENANCE
CHART
First
5 Hours of
Operation
Change
√

engine oil

Check engine
oil level
Inspect fuel
lines and
connections
Check
exterior fault
code indicator
light
Inspect
and clean
enclosure
louvers
Inspect and
clean battery
terminals
Inspect and
clean engine
air cleaner
Inspect
engine spark
plug
Complete
inspection
of generator
and engine
tune-up
* Monthly or 24 hours of continuous operation
** Service sooner if operating in high ambient temperatures or a
dusty and dirty environment.
*** Maintenance should be performed by your service dealer.
© 2015 Champion Power Equipment
All manuals and user guides at all-guides.com
Every
2 Years
Weekly Monthly or 100
Hours of
Operation
√**
√*
√
√
√
√
√**
√
√***

MAINTENANCE

ENGINE OIL

ENGINE OIL REQUIREMENTS

Use American Petroleum Institute (API) Service Class SN or
better. Do not use special additives. All temperatures full
synthetic 5W-30.
Over 32 °F (0 °C)
40 °F to -10 °F (4 °C to -23 °C)
10 °F or less (-12 °C or less)

CHECKING THE ENGINE OIL LEVEL

Check the oil level daily when the generator is running for an
extended period of time.
1. If the generator is running during a utility outage, turn off
all household loads.
2. Turn the engine control module switch to the OFF position.
3. Remove the dipstick. Wipe it dry with a clean cloth and
completely reinsert it into the dipstick tube. See figure 12,
page 24.
Figure 11
Model 100199
SAE 30
10W-30
Synthetic 5W-30
Part No. 101048 Rev. B
23