Description Of Machine; Description Of Working Cycle; Description Of Commands; Technical Data - Bezzera STREGA Manual De Instrucciones

3 - DESCRIPTION OF MACHINE

3.1 Description of working cycle

S/R/TOP Versions
The line pressure of the water directly coming from the water supply line (VERSION R) or, by means of
a pump, from the tank located on the rear of the machine (VERSION S - TOP-TANK) or from the water
supply line (VERSION TOP-DIRECT WATER CONNECTION), enables to load the boiler and, through
a relief valve set to 12 bar (1.2 MPa), the exchanger load. The water in the boiler, heated by a resist-
ance, warms the water in the exchanger. Lowering the group lever, the water is directly pumped from the
exchanger to the group chamber; when the group lever is released, coffee is brewed.

3.2 Description of commands

1 Main switch
2 Brewing coffee lever
3 Hot Water Nozzle
4 Water Inlet Pipe (R/TOP version)
5 Power Supply Cable
6 Brewing Group
7 Filter Holder
8 Steam Nozzle
9 Steam tap
10 Hot water tap
11 Power Light
12 Safety light
13 Drain pipe (R version)
14 Boiler's gauge
15 2 cup filter
16 1 cup filter

3.3 Technical data

Power Supply
Resistance
Nominal power
Resistance
Boiler
Tank (S)
Width "A"
Depth "B"
Height "C"
Net Weight
Gross Weight (box)
Nipple for water supply (R)
Drain Connector Diameter (R)
(Fig. 01 - Fig. 09)
(Fig. 02)
V~/Hz
V~
W
W
lt
lt
mm
mm
mm
kg
kg
mm
220 – 240V~ / 50-60Hz
220 - 240
1450 - 1650
1250 - 1450
28 (S version) = 31 (R version)
30.5 (S version) = 33.5 (R version)
25
BEZZERA STREGA
MOD.
110 – 120V~ / 50-60Hz
110
1550
1350
2,0
4,0
330
450
710
G 3/8"
10