universalblue USBANO2000-18 Manual De Instrucciones página 25

 To cancel the timer, press timer button as many times as
needed until the display is showing '00'.
 Once the appliance reaches the set time, the product will
stop heating. The wind will blow for about 15 seconds and
the grid will stop.
Display area to manage the timer:
TEMPERATURE
 When the product is working, press the
control panel or on the remote control. Temperature indicator
light will switch on and LED display will show 00-25-26-...39-
40º:
o Setting the value 00 will cancel the temperature.
o Setting a value between 21 and 30, the temperature
 After setting the temperature, the LED display will flash for
approximately 3 seconds.
 If you cancel the temperature, the display will show the room
temperature, and the temperature indicator light will be off.
Appliance will work at minimum temperature or
ambient temperature.
will reach the selected value.
button on the
25