Weekly Timer - universalblue USBANO2000-18 Manual De Instrucciones

 The appliance regulates the temperature of the room
automatically. If the proper temperature has been reached,
the device will stop. In the opposite way, when the
temperature is 2 degrees less than the selected temperature,
the device will start up again.
 To cancel the temperature, press temperature button as many
times as needed until the display is showing '00'.
Display area to manage the temperature:

WEEKLY TIMER

Weekly timer setting must be set when
the product is in standby mode. up,
down, ok & cancel knobs on the remote control
are only used to set the timer. in any case these
knobs will work to set the temperature.
To configure the weekly timer, follow the
following indications:
 Turn on the device and press the 'SET' button on the remote
control to set the current time. To set the time, press the up
26