Break-In - TOHATSU MFS 9.9E Serie Manual Del Propietário

]ENOM00033-A

4. Break-In

Your new outboard motor and lower unit
require break-in for the moving compo-
n e n t s a c c o r d i n g t o t h e c o n d i t i o n s
described in the following time table.
Please refer to ENGINE OPERATION sec-
tion (See page 32) to learn how to cor-
rectly start and operate the outboard
motor.
ENOW00024-A
DANGER
Do not operate the outboard motor in
closed area or area with no forced ventila-
tion.
Exhaust gas emitted by this outboard
motor contains carbon monoxide that will
cause death if inhaled continuously. Inhal-
ing the gas initially causes symptoms such
as feeling of sickness, drowsiness and
headache.
During operation of the outboard motor:
1–10 min
Throttle Position Idle
Speed
All manuals and user guides at all-guides.com
ENOW00023-1
Operating the outboard motor without
break-in can shorten service life.
If any abnormality is experienced during
the break-in:
10 min – 2 hrs
Less than 1/2 Less than 3/4
throttle
Full throttle run
Approx. 3000
allowed for 1
-1
min (rpm) max
min every 10 min
PRE-OPERATING PREPARATIONS
Keep peripheral area well ventilated.
Always attempt to stay on the windward
side of emission.
CAUTION
Discontinue the operation immediately.
Have the dealer check the product and
take proper action(s) if necessary.
ENON00008-0
Note
Proper break-in allows outboard motor to
deliver it full performance for longer service
life.
2–3 hrs 3–10 hrs
3/4 throttle
throttle
Approx. 4000
-1
min (rpm). Full
throttle run
allowed for 2
min every 10 min
29
6
After 10 hrs
Full throttle
available