TOHATSU MFS 9.9E Serie Manual Del Propietário página 75

Ocultar thumbs Ver también para MFS 9.9E Serie:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

1. Disconnect the fuel hose from the out-
board motor.
2. Remove the top cowl.
3. Loosen the screw (3pcs) of the drive
shaft housing cover on the port side.
ENON00936-0
Note
To avoid losing the bolts, the loosened bolts
cannot be removed.
4. Remove the cowl seal and loosen the
screw (4pcs) of the drive shaft housing
cover on the starboard side.
1
1. Cowl seal
5. Place an approved fuel container
under the drain tube end and use a
funnel to avoid spilling fuel.
All manuals and user guides at all-guides.com
6. Loosen the vapor separator drain
7. When thoroughly drained, retighten the
8. Check the drained fuel for the pres-
ENOF01248-0
1. Drain screw
ENOM00102-0
Battery
ENOW00931-A
ENOF01249-0
1. Disconnect the battery cables and be
2. Wipe off any chemical deposits, dirt, or
INSPECTION AND MAINTENANCE
screw.
drain screw securely.
ence of water or other contaminants. If
either is present, reassemble the out-
board motor, refill the vapor separator-
with fuel, and then drain the fuel again.
Repeat this procedure until no water or
other contaminants are present in the
drained fuel.
WARNING
Place the battery away from any source
of fire, sparks and open flames such as
burners or welding equipment.
Place the battery away from fuel tank.
Accidental sparks of battery may cause
explosion of gasoline.
sure to remove the negative terminal
first.
grease.
73
1
ENOF01250-0
10

Publicidad

Tabla de contenido
loading

Tabla de contenido