Usb Bluetooth; Setup; Menu Basics; Navigation Buttons - Rotel RSP-1580 Manual De Instrucciones

Tabla de contenido

Publicidad

English
3. The iPod/iPhone screen will remain active while connected to the unit.
If no operations are made from the iPod/iPhone for an extended period,
the screen will turn to "charging".
PlayBack Control Buttons
H
1. Use the PLAY / button to start playback.
2. Use the STOP . button to stop playback.
3. Use the PLAY //PAUSE , button to either pause a currently playing
track or to restart a currently paused track or to restart a stopped track.
4. Use the BACK TRACK buttons { to start playback of the previous
track in the list.
4. Use the FORWARD TRACK button } to start playback of the next
track in the list.
5. Push and hold the STOP . button for 5 seconds to safely remove
the USB device from the unit.
Note: The Rotel unit will operate with iPhone 4, iPhone 3GS, iPhone
3G, iPod Classic, iPod touch 2G, iPod Nano 2G, iPod Nano 3G, iPod
Nano 4G and iPod Nano 5G.

USB Bluetooth

The front USB can also accept a USB Bluetooth dongle (supplied). This
allows you to stream music from your Bluetooth device, i.e. mobile phone.
Insert the USB Bluetooth dongle into the front USB, the display will show
"READY" status. From your device (mobile phone etc..) activate Bluetooth
and allow it to search for other Bluetooth devices. It will find "Rotel
Bluetooth". Select "Rotel Bluetooth" and it will prompt you to enter a
password. Enter "0000" and accept. The RSP-1580 will recognize that
a device is attempting to connect to it, and will display this information
on the OSD. Press ENTER on the front panel or SEL key on the remote
to accept. The "READY" status will change to "RUNNING" and you can
start streaming music to the RSP-1580.
Note: Not all Bluetooth dongles will operate with the unit. Please use
the dongle supplied by Rotel.

SETUP

The Rotel RSP-1580 features two types of information displays to help
operate the system. The first consists of simple status displays that
appear on the TV screen and/or front panel display whenever primary
settings (Volume, Input, etc.) are changed. These status displays are
self-explanatory.
A more comprehensive ON-SCREEN DISPLAY (OSD) menu system is
available at any time by pressing the MENU/OSD button on the remote.
These OSD menus guide you through the configuration and setup of the
RSP-1580. In general, the settings made in the configuration process are
memorized as default settings and need not be made again for normal
operation of the unit.
The OSD menus can be configured to display several different languages.
The default English version of all main menus are shown at the front of
this manual. If your language is available, those menus will be shown
in the instructions. If you would like to change from the default English
language before proceeding, go to the instructions for the OTHER
OPTIONS menu later in this manual. From this menu, you can change
the language display.

Menu Basics

Navigation Buttons

The following control buttons are used to navigate the OSD menu
system:
MENU/OSD button: Press to display the MAIN MENU. If a menu is
already visible, push this button to cancel the display.
Up/Down Buttons: Press to move up and down in the lists of menu items
that appear on the OSD screens.
Left/Right Buttons: Press to change the current settings for a selected
menu item on OSD screens.
SELECT Button: From the SYSTEM STATUS screen, press SELECT to display
the MAIN MENU screen. From any other OSD screen, press SELECT to
confirm a setting and return to the MAIN menu.
31

Publicidad

Capítulos

Tabla de contenido
loading

Tabla de contenido