Publicidad
4
ATTACH THE BRACKETS.
Using a 5 mm hex wrench, attach the
awning using 2 screws, 2 thin washers, and,
2 thick washers as shown for each bracket.
Use the hex wrench to adjust the position
of the nut plates as necessary to align with
the screws. Tighten completely to 9 Nm ±1.
Instruction #1036150A - page 7 of 11
HIGH POSITION
POSITION HAUTE
POSICIÓN ALTA
LOW POSITION
POSITION BASSE
POSICIÓN BAJA
thin
mince
fina
thick
épaisse
gruesa
thin
mince
fina
thick
épaisse
gruesa
2X
Publicidad
